Aegis Modular Shelter Options

Aegis shelters offer the best choice for your next site installation. Aegis integrates permanence and flexibility of advanced, modular technology with quality and ease of factory-built prefab shelters. From pre-site system integration options to the expandability inherent to modular shelters, Aegis makes a logical solution for the most demanding site requirements.

Aegis' advance options includes specialized solutions for power distribution, AC & passive cooling, lightning protection, grounding (earthing) systems, and surge protection (TVSS).  Aegis Building Technologies advance options infuse its shelters with versatility and variety in order to provide the best site solution for a diverse range of applications.

More >>

Aegis Building Technologies

Shelter Expandability

Purchased with an Aegis modular building is the ability to expand the shelter at a later date. Expansions are done with modular additions (in length) without interruption to online services and is accomplished within one to two days. This capacity provides obvious planning relief for growth.

Back >>


Equipment Integration

When required, the client's equipment installation can be incorporated at the Aegis' building facility rather than on-site. Aegis accepts, warehouses, and insures the client's equipment, which is then installed during the last phase or after the building assembly but prior to delivery. This service streamlines the build-out process, saving time and money.

Back >


Cooling Systems

bulletActive Cooling Systems

Active air conditioning is a standard configuration for shelters, and it is the most efficient solution when the heat to be dissipated is high or when commercial power is available. The control of the internal temperature is achieved by using various solutions, which are selected according to the local environmental conditions, the internal thermal load, and the equipment temperature constraints. Aegis can provide shelters with several different active cooling systems:

bulletHeat Exchanger
bulletAir Conditioning Units
bulletHeaters (for low temperatures)

bulletPassive Cooling Systems

Shelter operators around the world are now exploring the possibilities of passive cooling systems by using Phase Change Materials. By using this technology savings on power usage for conventional heating and cooling systems is achieved thus lowering the energy costs of the network. Aegis can provide complete design and implementation of passive cooling technology in its shelters

Back >>


Grounding/Earthing Systems

Aegis offers Alltec Corporation’s TerraBar® brand copper bus bars.  TerraBar® is available in a full line of hole patterns and sizes along with all of the associated mounting hardware and insulators.  Along with standard hole sizes and patterns, a full inventory of raw materials in various sizes to allows the capability of providing fast turnaround time for any custom configurations.  The options of tin or nickel plating for any bars and capabilities of providing TerraBars® with ground leads exothermically welded to them are available

In addition to Alltec’s bus bars for grounding/earthing requirements, Aegis offers TerraDyne® Electrolytic Grounding Systems (EGS). TerraDyne® EGS is a multipurpose grounding/earthing system that has been designed to provide long term protection from lightning, electrical transients, static discharge, electro-magnetic interference, and other electrical hazards. The system has been designed for use in any type of soil condition. This system is commonly used in cellular, radio and television broadcasting sites, computer facilities, power substations, communication centers, medical facilities and industrial plants. It is stable grounding system that provides undisturbed long-term performance while maintaining cost efficiency.

Complimenting Alltec Corporation's Electrolytic Gruonding System is is TerraFill®. TerraFill® creates a reliable, low resistance, electrical connection between the grounding system and the earth. It is manufactured to be compatible with copper grounding systems and standard field application methods. It can be used in connection with grounding grids to minimize step and touch potentials. In high resistivity soils, TerraFill® can be used to produce acceptable grounding impedance within a reasonable sized area. Manufactured from environmentally safe and stable products. TerraFill® is self compacting, comes in easily transportable 50 lb (22.68 kg) bags, and can be easily installed by a single person.

Back >>


Lightning Protection

Aegis lightning protection equipment is provided by Alltec Corporation and includes its patented dissipation terminals, TerraStat®. TerraStat® lightning protection terminals are designed to protect anything from the tallest broadcast towers to the smallest remote scada system, and almost any type of structure or facility in between. Aegis Building Technologies provides the TS-500 & TS-510 terminals especially for broadcast and communications towers, high mast lighting and other high-risk structures. Whatever your requirements, Aegis has a product to fit the application. For special applications, a custom design may be manufactured to fit the site requirements.

Back >>


Surge Protection TVSS

Proper grounding alone will not protect a facility from damage due to surges, transients, or lightning. An effective combination of lightning protection, facility grounding/earthing, equipment bonding, and properly installed transient voltage surge suppression (TVSS) devices, or surge protection devices (SPD), on all circuit conductors maximizes total site protection. Aegis Building Technologies comprehensive site protection approach rests on good grounding, protection from direct lightning strikes, and properly implemented surge protection. Aegis relies on Alltec Corporation’s PowerTrip® devices to complete this strategy. PowerTrip® devices are available for AC and DC power, telephone/ data, and RF cabling protection. Aegis provides technical assistance on selecting the appropriate TVSS for your application and the expert installation that is crucial to protection success.

Back >>


Power Distribution Unit (PDU)

The Power Distribution Unit (PDU) supplies complete AC power management for Outdoor Telecom Installations. PDU’s ranging from 5 KVA to 25 KVA are used for power management at site. PDU’s also manage voltage, phase selection, surge protection and distribution & control of safety alarm. PDU’s require lower maintenance compared with traditional mechanisms.

The product intelligently controls running of Air Conditioners while Mains Power is available and conserves running of costly diesel generators in the absence of the regular supply of electric power.

The PDU is a comprehensive AC power supply and management system, in a single compact rack having following key features:

bullet itemProtection against lightning and voltage
surges
bullet itemAC distribution
bullet itemAlarms & Sensors management including fire
& smoke alarm
bullet itemStatic Voltage stabilization
bullet itemIntelligent phase selection
bullet itemWide input voltage range
bullet itemNetwork Management System
bullet itemIntelligent Auto Mains Failure (AMF) Panel
bullet itemAir Conditioner Distribution Board (ACDB)

Back >>


Communication Tower

A guyed, monopole, or self-supporting tower, constructed as a freestanding structure or in association with a building, other permanent structure or equipment, containing one or more antennas intended for transmitting or receiving television, AM/FM radio, digital, microwave, cellular, telephone, or similar forms of electronic communication. 

bulletGuyed Tower

A communication tower that is supported, in whole or in part, by guy wires and ground anchors is a Guyed Tower.

The substantial footprint of a guyed towers allows them to be constructed to substantial heights with greater loading than both Monopoles and Self Support towers (television towers), making them ideal for large microwave, broadcast and LMR applications.

Guyed towers require components such as guy wires, thimbles, guy brackets, pier pins, anchor rods and turnbuckles.

bulletLattice Tower (Self supporting)

A self-supporting three or four sided, open, steel frame structure used to support telecommunications equipment is a Lattice Tower.

Lattice Towers are designed for PCS/Cellular and point-to-point communication and  have a larger footprint than Monopoles, their structural design often enables them to carry more wind loading at a lower cost than monopoles.

These tower are normally constructed using hot dipped heavy duty galvanized steel.

bulletMonopole Tower

A communication tower consisting of a single pole, constructed without guy wires and ground anchors is a Monopole Tower. These towers are made of structural pipes & plates and are easily installed due to their precisely fitted connections. The connections allow each pole to be modified according to height and antenna configurations.

Monopoles are an ideal solution for many broadband, microwave and cellular applications in urban and suburban areas where space is a premium and aesthetics are a must.

Back >>


 

Click to View Shelter Design Features Click to View Shelter Construction Details Click to view Modular Shelter Options