Aegis Cell On Wheels

Cell Site

The Standard trailer equipment is mounted on a 40’ x 8’ trailer with all steel painted telescoping tower and control station, the PUF insulated air conditioned shelter housing BTS and other equipment and the DG set as power source.

Back >>

Telescoping Tower

The mobile telescopic tower is a 30 M mast, which can be erected and lowered electromechanically. The tower is heavy structure mounted on a standard truck chassis. The erection and lowering of the tower is a special operation, which requires trained and skilled personnel to perform.

Back >>

Air Conditioning

Model: TP-422 YE
Capacity: 3.5 TR (2x1.75 TR)
Air Flow (CMH.Circuit): 1780
Power Supply: 230V/1 PH/50 HZ
Compressor: Rotory Imported
Controller: MicroProcessor Control
Sensible Cooling/Circuit: 4725 Kcal/Hr
Total Cooling/Circuit: 5250 Kcal/Hr

Twin Rotary compressor gives Inbuilt redundancy of
refrigerant circuits with up to 15 % power saving over
Reciprocating compressor
Programmable set points of Temperature to suite site load.
Site settable range of voltage and current to suit different input power conditions across country
Complete protection for AC from unhealthy condition.
Smoke fire protection, D.G. sensing provided
Password protection for controller
Room temperature sensing by precise temperature sensor.
Separate outputs for each fan and compressor.
Direct display of Line voltage, actual current drawn by fan and Compressor and  actual room temperature
Sequencing of compressor for equal run hours, site
selectable

Back >>

DG Set

10/15/20/25 kVA DG Sets powered by Mahindra 2185/3255/3305/4375 Engines coupled to 0.8 pf, 3 Phase, 50 Hz, 1500 RPM Alternator mounted on a common Base frame, with all standard accessories like cables with Acoustic Enclosure and AMF panel.

DG Set Specification
DG Rating	Engine Model	BHP
10 KVA	2185 GM	18
15 KVA	3255 GM	25
20 KVA	3305 GM	30
25 KVA	4375 GM	37

Engine:  Four stroke, direct injection, compression ignition, Water-cooled (2185GM/3255GM/3305GM/4375GM) industrial diesel engine complete with cooling fan drive, lubricating oil filters, air cleaners, starter motor, battery charging alternator, fuel injection pump.

Cooling System: All engines mentioned above are water-cooled & complete with water pump, tropical capacity radiator for cooling the machine in tropical ambient temperatures with engine driven blower type heavy duty cooling fan.  Radiator core and fin design will take into account compensation for possible ingress of dirt which would normally clog the fins.

Fuel System:  The engine is fitted with Fuel Filters with replaceable elements, Fuel Injection Pump & Fuel Lines.

Lubricating Oil System:  The Lubricating oil system is complete with oil pump, oil filter with replaceable elements. 

Starting System: DG set will be provided with Starting keys & Battery of 120AH for 10/15/20/25 KVA DG sets.

Safety System: All Mahindra Engines are provided with HWT, LLOP & Water Level Safety systems for Water-cooled engines.  The controls for these safeties shall be provided through PIU/AMF unit. All safeties to be terminated on a strip/block

Air Inlet System: Air Intake system will be complete with Air cleaner with replaceable elements.

Exhaust Silencer System: The engine will be complete with residential capacity exhaust silencer(s) of the reactive type to meet an overall noise level of 75 dBA at 1 mtr (As specified by Central Pollution Control Board).

Alternator: The alternator will be as manufactured by Stamford/Crompton Greaves. The alternator will be of brush less, self-exciting, self-regulating design. The alternator will be tropically insulated and windings will be impregnated with thermosetting insulated varnish for use in tropical climates.

Control Panel: The control panel with the following indicators: Pressure gauge, Temperature gauge, Hour meter, Ammeter, Battery Charging indicators starting keys will be provided. 

Mounting Arrangement:  The engine and alternator will be mounted as a whole on a heavy duty fabricated steel baseframe constructed from folded channel sections.  Crane lifting arrangement is included.

Anti-vibration Mounting Pads: The above mentioned baseframe will be complete with anti-vibration mounting pads, affixed between the engine/alternator feet and the baseframe itself thus ensuring complete vibration isolation of the rotating assemblies and enabling the machine to be placed on an uneven surface without any detrimental effects.

Back >>